Hydraulic Top Replaced. Wheel & Brakes Paint Prep

A busy day today as both Dad and I were at work with some help from Conor. First up the hydraulic top cover was replaced on to the transmission, some adjustment of the new gasket was needed but refitting was made a lot easier as the tractor was in the workshop and all the lift components, a wheel and wing were removed :o) We finished up the preparation of the wheel rim and rim bolts for painting. The left wing has been removed. We setup for spraying some primer again but it was evident after a short while that we have an issue with the air compressor. This was very frustrating as we had the bonnet, wheel centre & rim, brake plate and a bunch of other parts ready to go. So a strip down of the compressor control unit and valve is now urgent. Website update: Added new page 'Implements' - this is very much in progress details & photos to follow. Added photos from today to 'Hydraulics' and 'Wheels & Steering' pages.